<!-- Generated by vite-plugin-geo; source: en/keyboards/air75-v2/index.html -->

# NuPhy Air75 V2 Shortcuts, VIA Setup & PNG Manual Guide

> NuPhy Air75 V2 complete shortcuts: FN + 1/2/3/4 wireless, RGB backlight and sidelight, FN + ] sleep, FN + \ battery LED (96–100% / 11–95% / 1–10%), FN + [ reset and VIA setup.

Air75 V2 is NuPhy’s 75% (84-key) low-profile tri-mode mechanical keyboard configured with QMK/VIA. All interactive sections 01–09 on the home cheat sheet and the ANSI diagram below apply directly to Air75 V2.

## Air75 V2 10-Second Cheat Sheet

Configuration tool

VIA / QMK via NuPhy Console (Chrome/Edge wired)

Wireless channels

FN + 1 / 2 / 3 (BT, hold 3s pair); FN + 4 (2.4G)

Turn off lights

FN + ↓ brightness down or FN + \] 6-min auto-sleep

Battery check

FN + \\ toggle (Green 96–100%, Orange 11–95%, Red 1–10%)

Factory reset

FN + \[ (hold 3 seconds)

## Verified Air75 V2 Shortcuts

- FN + 1 / 2 / 3 Switch or pair Bluetooth devices 1–3 Hold 3 seconds until left blue LED flashes quickly
- FN + 4 Switch to 2.4G receiver mode Press FN + 4 before inserting the dongle away from USB 3.0 interference
- FN + ↑ / ↓ / ← / → Backlight brightness (Up/Down), effect (Left) and color (Right)
- FN + < / > Decrease or increase backlight speed
- FN + M + ↑ / ↓ / ← / → / < / > Adjust sidelight brightness, effect, color and speed
- FN + \] Toggle 6-minute auto-sleep mode Right LED flashes 3x Green (ON) or 3x Red (OFF)
- FN + \\ Toggle persistent right-side battery level indicator
- FN + \[ Hold 3 seconds to restore factory settings
- Screenshot / FN + Screenshot Mac area/full screenshot or Windows full screenshot

## 75% ANSI keyboard diagram for Air75 V2, Air75 V3 and Air96 V2 (sections 01–09)

ESC F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 SET SLEEP DEL

~ \` ! 1 @ 2 # 3 $ 4 % 5 ^ 6 & 7 \* 8 ( 9 ) 0 \_ \- + \= BACKSPACE PGUP

TAB Q W E R T Y U I O P { \[ } \] | \\ PGDN

CAPS A S D F G H J K L : ; " ' ENTER HOME

SHIFT Z X C V B N M < , \> . ? / SHIFT ↑ END

CTRL OPT CMD CMD FN CTRL ← ↓ →

## Layout, Firmware & Charging Notes

- Air75 V2 uses an 84-key 75% low-profile ANSI layout and is configured with QMK/VIA rather than NuPhyIO.
- If 2.4G lags or drops, avoid metal USB hubs and USB 3.0 ports; use a USB 2.0 port or extension cable.
- Charge with a standard 5V/1A adapter or computer USB port (avoid high-power PD fast chargers).

## Air75 V2 Manual & VIA Resources

[Open Air75 V2 PNG quick guide](/guide/NuPhy_Air75_V2_Use_Guide.png) [Open configuration tool: VIA](https://nuphy.com/pages/console) [Manuals: Air75 V2](/en/manual/#manual-air75-v2) [Keyboard models](/en/keyboards/)

## Related Air75 V2 Troubleshooting Guides

### [NuPhyIO & VIA Setup](/en/guides/nuphyio-via-setup/)

Find out if your keyboard uses NuPhyIO 2.0 or QMK/VIA, fix WebHID browser and USB-C errors, and protect dual-edition boards.

### [Bluetooth & 2.4G Pairing](/en/guides/bluetooth-pairing/)

Match FN + 1/2/3/4 vs Air60 V2 FN + Q/W/E/R, enter fast-flash pairing mode, and stop 2.4G dongle dropouts.

### [Backlight & RGB Control](/en/guides/backlight-rgb/)

Adjust main RGB and sidelights with FN shortcuts, and learn why FN + Tab works on some models while others use FN + Down or FN + \].

### [Battery & LED Indicators](/en/guides/battery-indicator/)

Use the interactive LED decoder to match exact battery percentage colors across Air, Kick75, Halo V2 (VIA vs IO), Node Dot Matrix and HE models.

### [Reset & Sleep Troubleshooting](/en/guides/reset-sleep-troubleshooting/)

Stop unwanted 6-minute sleep disconnects, find ANSI vs JIS/ISO factory reset shortcuts, and follow safe reset/Recovery rules.

## Air75 V2 Frequently Asked Questions

Does Air75 V2 use VIA or NuPhyIO?

Air75 V2 uses QMK and VIA, not NuPhyIO. Connect directly over a USB-C data cable in Wired mode and open VIA via NuPhy Console in Chrome or Microsoft Edge.

How do I turn off Air75 V2 RGB lighting?

Air75 V2 manuals do not use FN plus Tab. Reduce brightness to minimum using FN plus the Down arrow, or enable 6-minute auto-sleep with FN plus the right bracket key.

How do I pair Air75 V2 Bluetooth and 2.4G?

Switch to Wireless mode, hold FN plus 1, 2 or 3 until the left indicator flashes blue quickly for Bluetooth, or press FN plus 4 before plugging the 2.4G receiver into a port away from USB 3.0 devices.

How do I factory reset Air75 V2?

Hold FN plus the left bracket key for 3 seconds. This clears custom keymaps and pairings so you can re-pair Bluetooth, while leaving the installed firmware version unchanged.
