<!-- Generated by vite-plugin-geo; source: en/guides/reset-sleep-troubleshooting/index.html -->

# NuPhy Factory Reset & Sleep Mode Troubleshooting Guide

> Fix NuPhy 6-minute auto-sleep disconnects, check ANSI FN + [ vs JIS FN + @ and ISO reset keys, learn what factory reset clears, and review safety rules.

## Quick Answer: Sleep Toggle & Layout-Specific Reset Keys

Toggle 6-minute auto-sleep with FN + \] on ANSI models (3x green flashes = ON, 3x red = OFF; Air100 V3 JIS uses FN + \[). To factory reset ANSI boards, hold FN + \[ for 3 seconds (without pressing Shift). On ISO and JIS Air V3 or Node75 models, reset keys shift by physical layout (e.g., Air100 V3 JIS = FN + @ for 3 seconds).

## 1\. Troubleshoot 6-minute auto-sleep mode

- Default sleep behavior turns RGB lights off and enters low-power sleep after 6 minutes of no key input.
- Press FN + \] (ANSI) or FN + \[ (Air100 V3 JIS) to toggle sleep mode: 3 green flashes = Sleep ON, 3 red flashes = Sleep OFF.
- If your keyboard wakes slowly on macOS/Windows or drops lighting during long meetings, toggle sleep OFF temporarily while checking battery charge.

## 2\. Factory reset keys by model & physical layout

Model / Physical Layout

Factory Reset Shortcut (Hold 3s)

Notes

ANSI: Air60 V2, Air75 V2, Air96 V2, Air75 V3, Air100 V3, Air75 HE, Kick75, Halo75 V2, Halo96 V2

FN + \[ (without Shift)

On Halo75 V2 / Halo96 V2, ensure Shift is NOT held

Air100 V3 JIS

FN + @

Sleep = FN + \[ ; Battery = FN + \]

Air V3 ISO-UK / ISO-DE / ISO-FR / ISO-SE

UK: FN + {\[ | DE: FN + Ü | FR: FN + ¨/^ | SE: FN + Å

Confirm exact diagram in NuPhyIO manual center

Node75 (LP/HP), Node100 (LP/HP), Air60 HE

Per exact LP/HP & layout manual

Check official NuPhyIO manual center or Air60 HE PNG

A factory reset erases custom keymaps, RGB modes and Bluetooth/2.4G pairings (you must re-pair wireless devices), but it does NOT change or downgrade your firmware version.

## 3\. When NOT to factory reset or flash firmware

NEVER reset or flash firmware if the battery is swelling, overheating or physically damaged, or if your keyboard is stuck in Bootloader / Recovery mode. Unplug damaged batteries immediately, and for Recovery loops follow only the exact official recovery guide for your model and edition (never mix IO vs QMK/VIA files).

## Model pages with layout-specific reset notes

[Air75 V3](/en/keyboards/air75-v3/)[Air100 V3](/en/keyboards/air100-v3/)[Node75 Low-Profile](/en/keyboards/node75-lp/)[Halo75 V2](/en/keyboards/halo75-v2/)[Halo96 V2](/en/keyboards/halo96-v2/)[Kick75](/en/keyboards/kick75/)

## Setup & troubleshooting guides

[NuPhyIO & VIA Setup](/en/guides/nuphyio-via-setup/)[Bluetooth & 2.4G Pairing](/en/guides/bluetooth-pairing/)[Backlight & RGB Control](/en/guides/backlight-rgb/)[Battery & LED Indicators](/en/guides/battery-indicator/) [Guides](/en/guides/)

## Reset & Sleep Troubleshooting Questions

Does a NuPhy factory reset downgrade or update firmware?

No. Holding the factory reset combo clears saved keymaps, lighting profiles and wireless pairings, but keeps the currently installed firmware version intact.

Why does FN plus left bracket not reset my JIS or ISO Air V3 keyboard?

Reset key positions follow physical ISO and JIS keycaps rather than ANSI. For example, Air100 V3 JIS uses FN plus at-sign, ISO-DE uses FN plus U-umlaut and ISO-SE uses FN plus A-ring.

Why did my lights flash green or red three times when pressing FN plus right bracket?

Three green flashes confirm 6-minute auto-sleep is enabled, while three red flashes confirm auto-sleep is disabled.

What should I avoid when troubleshooting a dead or stuck keyboard?

Never trigger a reset or flash firmware if the battery is swelling or overheating, or if the keyboard is stuck in Recovery mode where flashing the wrong edition file can worsen the failure.
