<!-- Generated by vite-plugin-geo; source: en/index.html -->

# NuPhy Air75 V3 / Node75 Shortcuts, Backlight, Pairing Guide

> Air75 V3 and Node75: change or turn off the backlight, check battery level, pair Bluetooth and factory reset, with the FN shortcut for each step.

## 01. System Selection

Win mode

Mac mode

## 02. Connection Mode Selection

Power off

Wired mode

Wireless mode

Use a data-capable USB cable to connect the keyboard in wired mode.

## 03. Wireless Device Connection

FN !
1 @
2 #
3 $
4

FN + 1 / 2 / 3 / 4 Bluetooth device 1 / Bluetooth device 2 / Bluetooth device 3 / 2.4G

Press briefly to switch devices, or hold for 3 seconds to enter pairing mode. For 2.4G, press FN + 4 before connecting the included receiver to your computer.

### How do I pair Air75 V3 or Node75 over Bluetooth?

Channels 1–3 each hold one Bluetooth device, and channel 4 is reserved for the 2.4G receiver.

1. FN + 1 / 2 / 3 Press briefly to switch device. Hold until the blue left-side indicator flashes quickly to enter pairing mode.
2. Open Bluetooth settings on your computer, tablet or phone and select the NuPhy keyboard entry.
3. FN + 4 Switch to the 2.4G receiver, then plug the receiver into a USB-A port away from metal hubs and USB 3.0 devices.

If the keyboard does not show up, remove the old Bluetooth record, keep the keyboard close to the device and repeat the first step.

[Air75 V3 model notes](/en/keyboards/#model-air75-v3)

## Left-side RGB

Caps Lock active

Wired mode

Bluetooth mode

2.4G mode

## Right-side RGB

Battery level 1%–10%

Battery level 11%–95%

Battery level 96%–100%

Sleep mode on (3 flashes)

Sleep mode off (3 flashes)

## System mode indicator

Win mode (3 flashes)

Mac mode (3 flashes)

## 75% ANSI keyboard diagram for Air75 V2, Air75 V3 and Air96 V2 (sections 01–09)

ESC F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 SET SLEEP DEL

~ \` ! 1 @ 2 # 3 $ 4 % 5 ^ 6 & 7 \* 8 ( 9 ) 0 \_ \- + \= BACKSPACE PGUP

TAB Q W E R T Y U I O P { \[ } \] | \\ PGDN

CAPS A S D F G H J K L : ; " ' ENTER HOME

SHIFT Z X C V B N M < , \> . ? / SHIFT ↑ END

CTRL OPT CMD CMD FN CTRL ← ↓ →

## 04. Keyboard Backlight Settings

FN ↑ ↓ ← →

FN <
, \>
.

FN + ↑ / ↓ Increase or decrease backlight brightness

FN + ← Switch the backlight effect

FN + → Switch the backlight color

FN + < / > Decrease or increase backlight speed

### How to change, dim or turn off the backlight

The lighting is controlled with the arrow keys, so no software or driver is needed.

1. FN + ↑ / ↓ Increase or decrease backlight brightness
2. FN + ← Switch the backlight effect
3. FN + → Switch the backlight colour
4. FN + < / > Decrease or increase backlight speed

To stop the lighting while the keyboard is idle, turn sleep mode on with FN + \]; the lighting switches off once the keyboard stops receiving input.

[Air75 V3 model notes](/en/keyboards/#model-air75-v3)

## 05. Sidelight Settings

FN M ↑ ↓ ← →

FN M <
, \>
.

FN + M + ↑ / ↓ Increase or decrease sidelight brightness

FN + M + ← Switch the sidelight effect

FN + M + → Switch the sidelight color

FN + M + < / > Decrease or increase sidelight speed

## 06. Sleep Mode Settings

FN }
\]

FN + \] Turn sleep mode on or off

After 6 minutes without input, the lighting turns off and the keyboard enters sleep mode.

## 07. Screenshot Shortcuts

 ![Screenshot](https://nuphy.dev/guide/icons/screenshot-key.svg)/ FN ![Screenshot](https://nuphy.dev/guide/icons/screenshot-key.svg)

Screenshot key (Mac) Capture a selected area

FN + Screenshot key (Mac) Capture the full screen

Screenshot key (Win) Capture the full screen

## 08. Other Key Combinations

FN |
\\

FN + \\ Turn the persistent battery-level display on or off

### How to check the battery level

The right-side indicator reports the charge level while the keyboard is awake.

1. FN + \\ Toggle the persistent battery-level display on or off
2. Read the right-side indicator: green for 96–100%, orange for 11–95% and red for 1–10%.

Air75 V3 uses a 4000mAh battery; NuPhy laboratory data lists 60–100 hours with all lights on and up to 1200 hours with RGB off.

[Air75 V3 specifications](/en/keyboards/#model-air75-v3)

## 09. Factory Reset

FN {
\[

FN + \[ Hold for 3 seconds to restore factory settings.

### How to factory reset Air75 V3

A factory reset clears the settings stored on the keyboard.

1. FN + \[ Hold for 3 seconds to restore factory settings
2. Pair each Bluetooth channel again and reapply any lighting or key settings.

The same FN + \[ reset applies to Air75 V2 and Air96 V2; Node75 follows its own manual. A reset does not update firmware.

[Node75 Low-Profile model notes](/en/keyboards/#model-node75-lp)

## 13. Configuration Tools and Firmware

Use the tool assigned to your exact model. Check the official manual center before changing firmware.

### VIA models

Use VIA for Air60 V2, Air75 V2 and Air96 V2.

[Open VIA through NuPhy Console](https://nuphy.com/pages/console)

### NuPhyIO models

Use NuPhyIO for Air60 HE, Air75 V3, Node75 and Node100.

[Open NuPhyIO](https://www.nuphy.io/en-US)

### Firmware

Use the official manual center to select Node75, Node100 and other models by LP/HP and ANSI, ISO or JIS layout.

[Official manual center](https://www.nuphy.io/en-US/keyboardDescription)

Open the official firmware entry, then select the exact model and layout. Flashing steps are intentionally left to the official instructions.

[Open official firmware page](https://nuphy.com/pages/firmware)

## Frequently Asked Questions

How do I identify which model instructions apply?

Check the exact model name and layout printed on the keyboard or packaging. Sections 01–09 apply to Air75 V2, Air75 V3 and Air96 V2. For Node75 only sections 01–03 apply, so use the Node75 manual for sleep, lighting and reset.

Should I use VIA or NuPhyIO?

Use VIA for Air60 V2, Air75 V2 and Air96 V2. Use NuPhyIO for Air60 HE, Air75 V3, Node75 and Node100.

How do I pair Bluetooth or 2.4G?

Follow the matching model instructions, then hold its model-specific channel key until the relevant indicator flashes quickly. The channel keys differ by model.

What should I do if a wireless connection is unstable?

Remove the old Bluetooth record and pair again. Keep the 2.4G receiver away from metal hubs, USB 3.0 devices and other transmitters.

What should I know about Air75 V3 battery life and charging?

Laboratory data rates the 4000mAh battery at 60–100 hours with all lights on and up to 1200 hours with RGB off. The official manual recommends a 5V/1A charger; turn lighting off for longer wireless use.

How can I update firmware safely?

Open the official firmware page and follow its latest instructions for selecting the exact model and layout.

Which ANSI, ISO, JIS, Node75 or Node100 manual should I use?

Confirm LP or HP first, then choose the manual matching the ANSI, ISO or JIS layout. The local Node75 PDF covers Low-Profile only; use the official manual center for Node75 HP and Node100.

How do I change or turn off the backlight?

Use FN plus the Up and Down arrows to change brightness, FN plus Left and Right to change the effect and color, and FN plus the comma and period keys to change speed. To stop the lighting while the keyboard is idle, turn sleep mode on with FN plus the right bracket key.

How do I check the battery level?

Press FN plus the backslash key to toggle the persistent battery display, then read the right-side indicator: green for 96 to 100 percent, orange for 11 to 95 percent and red for 1 to 10 percent.

How do I factory reset Air75 V3?

Hold FN plus the left bracket key for 3 seconds to restore factory settings, then pair each Bluetooth channel again. Air75 V2 and Air96 V2 use the same shortcut; Node75 follows its own manual.
